Filgen BCH Turbo Series I

Filgen BCH TURBO SERIES has a non-overloading characteristic designed into the wheel. The proper motor provided will not be overloaded even if the blower is not operated at the point selected. Only a change of fan rpm may necessitate a change of electric motor size.

17 Fan sizes are available: 12.187" to 64.375" wheel diameters. Always choose a standard size fan for easy maintenance and replacement of parts. Of course, a standard fan will be more economical. Bigger size fans are available but are not catalogued. These are models 141 to 160.

bch DSO for BG
home products slide03

Filgen Design 40 Airfoil Vaneaxial Fan

Filgen DESIGN 40 VANEAXIAL FAN is used mainly for clean air systems. It cannot be used for paint, resin or any polluted air stream where anything will adhere and coat the electric motors.

The availability of motors in 50 or 60 cycles, and in 2, 4 or 6 poles, is a factor for this model. When explosion proof motors for critical areas are not available, the v-belt driven model with ordinary motor outside can be used.

p vaf2 big
VAF with damper2

Filgen Power Roof Ventilators

Filgen POWER ROOF VENTILATORS use galvanized materials for long lasting weather proof and maximum corrosion resilience. It utilizes a low silhouette - typhoon resistant design.

For general ventilation, Roof Ventilators can be located directly above hot spot areas of factories.


Filgen BCA Airfoil Fans

Filgen BCA AIRFOIL FANS Series 800 is a result of careful design and exhaustive testing. The shape of the airfoil alone required extensive research and series of test work before it was produced. The final product is a wheel with high efficiency, quiet operation and very strong framework.

The airfoil blade incorporates the non-overloading characteristic of the backward-inclined blade with the pressure-producing design of the forward-curve blade. The wheel runs at a slower speed than most airfoils but delivers more air than that of other wheels with similar designs, at the SAME rpm.

Airfoil wheels are inherently strong in construction and can withstand faster speeds. Therefore, a Class 3 wheel design is included. The operating limits of the three classes are as follows:

Class 1 - 11,000 FPM tip wheel speed
Class 2 - 13,500 FPM tip wheel speed
Class 3 - 17,000 FPM tip wheel speed

For added safety and durability, Class 3 wheel blades have internal reinforcement within the airfoils.

The same common housing for Series 800 is used, which saves cost and lowers inventory investment.

pp bca

Filgen BCF Series 800

Filgen BCF WHEEL DESIGN is a product of extensive research and development. Tested and installed in various establishments, its non-overloading characteristic and high efficiency performance is ideal for general air passage requirements.

Suitable for long hours of continuous operation, its high efficiency performance saves energy and operating cost. Its non-overloading feature guards drive motors against unforeseen or premature breakdown. This assures years of uninterrupted and efficient operation.

This type of wheel is very popular and has been installed in large hotels, high rise buildings, industrial factories and similar applications.

Class 1 - 9,500 FPM tip wheel speed
Class 2 - 13,000 FPM tip wheel speed

Page 1 of 2

Product Line

  • Tubeaxial & Vaneaxial Airfoil Fans
  • Backward Inclined Airfoil Blowers
  • Power Roof Ventilators
  • Turbo Industrial Blowers
  • Cyclone & Filterbag Dust Collectors
  • Centrifugal & Tubular In-Line Fans
  • Pollution Control Devices
  • Room Aircon fans & blowers
  • Forward Curve Blowers
  • Exhaust & Ventilating Fans
  • High Pressure Blowers
  • Radial Blowers
  • Airfoil Wheels
  • Utility Blowers
  • Cabinet type Blowers

Services Offered

  • Design of Exhaust & Ventilation Systems
  • Installation of Fans & Blowers
  • Repairs & upgrading of Fans & Blowers
  • Dynamic Balancing up to 120" diameter